Blog

Sheet metal bending, from design to production

Practical articles on the K-factor, flat patterns, simulation, NC and CNC press brakes and the daily work of people who quote, design and bend.

How to turn an NC press brake into a CNC press brake

8 min read

How to turn an NC press brake into a CNC press brake

In this article, we explain the difference between NC and CNC press brakes, how to get the Y axis position for each angle and when a control retrofit makes sense.

K-factor table: which value should you use for bending?

7 min read

K-factor table: which value should you use for bending?

In this article, we explain how to choose the K-factor from the DIN 6935 table, what changes with the die, the process and the material, and how to measure your press brake's K.

Bending simulation for quoting: why use it?

8 min read

Bending simulation for quoting: why use it?

In this article, we explain how bending simulation helps you quote formed parts: whether the part bends, with which tooling, in how many setups, how long it takes and what the flat pattern is.

Pre-bend vs. process bend: what is the difference?

8 min read

Pre-bend vs. process bend: what is the difference?

In this article, we explain the difference between a pre-bend and a process bend, when each move clears a collision on the press brake and how to check the result in simulation.